#PD-UF Package Deal for the #UF-25H Universal Fabricator
$14,989.00
#PD-UF Package Deal for the #UF-25H Universal Fabricator
Support USA jobs. Buy Better built tools made in our country.
To order the fabricator please call Shop Outfitters direct at (719) 676-5555
Description
Package deal includes everything seen on this page (less the bent sample parts). Includes the very useful Handy Bend. Scroll down to see the complete list of these items and the #UF-25H Universal Fabricator specifications.
Shown with all the Tubing Dies that come with the package deal
Package Deal includes everything seen above and everything shown on the list below.
Note: To purchase the Fabricator for less money without tube dies or a limited number of them scroll down to the bottom of this page.
Dies sizes and specifications. CLR refers to center line radius. ISR refers to inside radius.
View Dies & Accessories That Work With This Machine
| 1/2″ | Round tube die set | (CLR) | 1.5″ | bends 16 to 10 gauge |
| 3/4″ | Round tube die set | (CLR) | 2.5″ | bends 16 to 10 gauge |
| 1″ | Round tube die set | (CLR) | 4″ | bends 14 to 10 gauge |
| 1-1/4″ | Round tube die set | (CLR) | 4″ | bends 14 to 10 gauge |
| 1-1/2″ | Round tube die set | (CLR) | 4.5″ | bends 14 to 10 gauge |
| 1/2″ | Square tube die | (ISR) | 1.25″ | bends 16 to 10 gauge |
| 3/4″ | Square tube die | (ISR) | 1.9375″ | bends 16 to 10 gauge |
| 1″ | Square tube die set | (ISR) | 3.5″ | bends 14 to 10 gauge |
| 1-1/4″ | Square tube die set | (ISR) | 3.375″ | bends 14 to 10 gauge |
| 1-1/2″ | Square tube die set | (ISR) | 3.750″ | bends 14 to 10 gauge |
| 1″ | Pipe die set | (CLR) | 4″ | bends 1″ schedule 40 pipe |
| 1-1/4″ | Pipe die set | (CLR) | 4.5″ | bends 1-1/4 schedule 40 pipe |
Note: Everything listed below automatically comes with the #UF-25H Universal Fabricator whether you purchase any tubing dies with it or not. Also, flat stock dies are 1/16″ under size to allow for some material spring back.
- 1-1/4″ Flat stock die (heat treated)
- 1-1/2″ Flat stock die (heat treated
- 1-3/4″ Flat stock die (heat treated)
- 2″ Flat stock die (heat treated)
- 2-1/2″ Flat stock die (heat treated)
- 3″ Flat stock die (heat treated)
- Stop Block
- Sharp Right Angle Bend Attachment
- Hydraulic foot pump & 5 ton cylinder
- 25 ton cylinder (mounted on press)
- Four 3/4″ round headed pins and one
- 5/8″ round headed pin (all heat treated)
- Bending Handle
- Slide Bar Assembly
- Slide Lock
- Lock-N-Stop Gauge Assembly
- Comprehensive instruction manual
* Handy Bend mild steel capacities:
With 10″ V-Block in place:
1/8″ up to 10″, 3/16″ up to 8″, 1/4″ up to 4″
With 10” V-Block removed:
5/16″ up to 10″, 3/8″ up to 8″, 1/2″ up to 4″, 5/8″ up to 2″
* Lower cabinet with press and hydraulic switch valve mounted on it
Other Specifications:
Base cabinet has a durable steel grey powder coated finish. Parts are precision machined with rounded smooth corners and those not plated or painted have a phosphate scratch resistance coating.
Shipping weigh in wood shipping crate — 960 pounds
Assembled weight out of the crate —- 823 pounds
Overall Dimensions of assembled unit
Height- 63″ Width- 26″ Length-50 inches
Machine requires a minimum 5 hp. air compressor (supplied by the owner) that can deliver 120 to 130 PSI.
When purchasing the #UF-25H Universal Fabricator with a limited number of tubing dies click on parts and accesories to get individual die prices for this machine.
Includes the basic machine with Handy Bend and hydraulics as shown here but without any tubing dies. Unit also includes the 6 standard flat dies(listed above) Stop Block and sharp right angle bend attachment as seen here racked on the lower cabinet.
Note: Tubing dies can be added later as needed or the unit can be purchased as a package deal with all the pipe, round and square tubing dies avalible for the #UF-25H Universal Fabricator included.